Forum Title: Bathroom vanity wasteline
Hi. I'm trying to plumb a wasteline in a bathroom vanity that's 18" deep. The tailpiece is in direct line with the 1 1/2" wasteline... so there's not much room to fit the trap because it's so close. What's the best way to deal with this?
Category: Plumber Post By: BENJAMIN BAILEY (Palm Coast, FL), 02/05/2017

Use an offset fitting on the line coming out of the wall to point the trap slightly away from the tailpiece.

- PERRY ROJAS (Paterson, NJ), 09/09/2017

I think by now you must have got the solution to your issue. Yes, an offset fitting could have helped to plumb the wasteline. Sometimes, there comes a critical situation when one is not able to solve the problem of plumbing. What else could be better than consulting a professional plumber at such situation? By doing this, the possibilities of the risk are reduced to a greater extent and one can save a lot of time and energy too. So if you encounter this problem again, you can directly contact the professionals by browsing the link ( and can get all your problem solved easily.

- (, ), 04/06/2018

Homeowner Plumbing Resource Guide & Helpful Links

requestaquote Get Free Quotes callnow 888-880-2779